Dayton Audio DC130BS-4
woofer · EBP 118 → suits a ported box · nominal (full) — Dayton Audio datasheet (https://www.daytonaudio.com/images/resources/295-302-dayton-audio-dc130bs-4-specifications.pdf)
Thiele/Small parameters
| Fs (resonance) | 51.8 Hz |
| Qts | 0.35 |
| Qes / Qms | 0.44 / 1.86 |
| Vas | 13.2 L |
| Re / nominal Z | 3.55 Ω / 4 Ω |
| Xmax | 2.5 mm |
| Sensitivity | 88.0 dB (1 W/1 m, calc); 91.6 dB (2.83 V/1 m, mfr) |
| Power handling | 30 W |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
| Sealed (Qtc 0.707) — Vb | 4.3 L |
| Sealed — Fc / F3 | 104.6 / 104.7 Hz |
| Ported (suggested) — Vb | 8.3 L |
| Ported — Fb / F3 | 59.9 / 62.3 Hz |
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Dayton Audio DC130BS-4 is a 5.5″ woofer with a free-air resonance of 51.8 Hz and a total Q (Qts) of 0.35. Its efficiency-bandwidth product (EBP) of 118 points toward a ported alignment. In a 4.3 L sealed box it reaches an F3 of 104.7 Hz (Qtc 0.707); a suggested 8.3 L box tuned to 59.9 Hz extends to about 62.3 Hz. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe tweeters below pair well with the Dayton Audio DC130BS-4 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Seas 27TBFC/G H1212-06Good match· 92/100
Suggested crossover 1.51 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SB29RDC-C000-4Good match· 92/100
Suggested crossover 1.51 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SATORI TW29BGood match· 92/100
Suggested crossover 1.51 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SATORI TW29B-BGood match· 92/100
Suggested crossover 1.51 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SATORI TW29D-BGood match· 92/100
Suggested crossover 1.51 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SB29RDAC-C000-4Good match· 92/100
Suggested crossover 1.51 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.