Sine Design

Dayton Audio ND28F-6

tweeter · EBP 373 → suits a ported box · nominal (partial) — Dayton Audio datasheet (https://www.daytonaudio.com/images/resources/275-040-dayton-audio-nd28f-6-specifications-46119.pdf)

Thiele/Small parameters

Fs (resonance)1097 Hz
Qts1.24
Qes / Qms2.94 / 2.16
Vas—
Re / nominal Z5.4 Ω / 6 Ω
Xmax—
Sensitivity88.4 dB (2.83 V/1 m, mfr)
Power handling30 W

Published (nominal) values, params partial — verify by measurement (DATS/REW) before building.

Datasheet (PDF) ↗ — manufacturer-hosted

Recommended enclosures

This is a tweeter; Thiele/Small box parameters are not used for enclosure design.

Buy at Parts Express →

Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.

About this driver

The Dayton Audio ND28F-6 is a 1″ tweeter with a free-air resonance of 1097 Hz and a total Q (Qts) of 1.24. Its efficiency-bandwidth product (EBP) of 373 points toward a ported alignment. See the sealed vs ported guide for how to choose.

Recommended partners

modeled estimate

The woofers and midranges below pair well with the Dayton Audio ND28F-6 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.

Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.

Related tweeters