Faital Pro 6HX150
woofer · EBP 251 → suits a ported box · nominal (full) — Faital Pro datasheet (https://faitalpro.com/products/files/6HX150/8/6HX150_datasheet_8.pdf)
Thiele/Small parameters
| Fs (resonance) | 88 Hz |
| Qts | 0.34 |
| Qes / Qms | 0.35 / 8.3 |
| Vas | 6.3 L |
| Re / nominal Z | — / — |
| Xmax | 4.3 mm |
| Sensitivity | 93 dB (2.83 V/1 m, mfr) |
| Power handling | 150 W |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
T/S are full — fetch the datasheet for the full parameters to model a box.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Faital Pro 6HX150 is a woofer with a free-air resonance of 88 Hz and a total Q (Qts) of 0.34. Its efficiency-bandwidth product (EBP) of 251 points toward a ported alignment. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThese tweeters could pair with the Faital Pro 6HX150 in a two-way design, but the seed Thiele/Small data is too thin to grade the match yet — add or measure T/S (Fs, Sd, Xmax) to compute a real compatibility grade. You can still open a pair in the guided builder.
- Dayton Audio AMT-Mini-8Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair → - Dayton Audio AMT2-4Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair → - Dayton Audio AMT3-4Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair → - Dayton Audio AMTPOD-4Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair → - Dayton Audio AMTPRO-4Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair → - Dayton Audio AN25F-4Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.