GRS 12SW-4HE
subwoofer · nominal (partial) — GRS datasheet (https://www.parts-express.com/pedocs/specs/Spec%20Sheets/292-820--grs-12sw-4he-spec-sheet.pdf)
Thiele/Small parameters
| Fs (resonance) | 22 Hz |
| Qts | 0.43 |
| Qes / Qms | — / — |
| Vas | 80.4 L |
| Re / nominal Z | — / — |
| Xmax | 12.5 mm |
| Sensitivity | 84.5 dB (2.83 V/1 m, mfr) |
| Power handling | 250 W |
Published (nominal) values, params partial — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
T/S are partial — fetch the datasheet for the full parameters to model a box.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The GRS 12SW-4HE is a subwoofer with a free-air resonance of 22 Hz and a total Q (Qts) of 0.43. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThese tweeters could pair with the GRS 12SW-4HE in a two-way design, but the seed Thiele/Small data is too thin to grade the match yet — add or measure T/S (Fs, Sd, Xmax) to compute a real compatibility grade. You can still open a pair in the guided builder.
- Dayton Audio AMT-Mini-8Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair → - Dayton Audio AMT2-4Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair → - Dayton Audio AMT3-4Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair → - Dayton Audio AMTPOD-4Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair → - Dayton Audio AMTPRO-4Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair → - Dayton Audio AN25F-4Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.