Peerless by Tymphany D27TG35-06
tweeter · EBP 903 → suits a ported box · nominal (headline) — Tymphany D27TG35-06 driver specification sheet (manufacturer)
Thiele/Small parameters
| Fs (resonance) | 911.7 Hz |
| Qts | 0.55 |
| Qes / Qms | 1.01 / 1.21 |
| Vas | 0.0 L |
| Re / nominal Z | 4.89 Ω / 6 Ω |
| Xmax | 0.5 mm |
| Sensitivity | 90.6 dB (1 W/1 m, calc); 92.77 dB (2.83 V/1 m, mfr) |
| Power handling | 100 W |
Published (nominal) values, params headline — verify by measurement (DATS/REW) before building. datasheet
Recommended enclosures
This is a tweeter; Thiele/Small box parameters are not used for enclosure design.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Peerless by Tymphany D27TG35-06 is a 1″ tweeter with a free-air resonance of 911.7 Hz and a total Q (Qts) of 0.55. Its efficiency-bandwidth product (EBP) of 903 points toward a ported alignment. See the sealed vs ported guide for how to choose.
NOMINAL/manufacturer (Tymphany spec sheet). Fs 911.7 Hz; Zmin 5.49 ohm (nominal 6); Sd 7.1 cm2; sensitivity 92.77 dB@2.83V (91.1 dB@1W); Xmax 0.5 mm; Cms 138 um/N. Test bandwidth 2.5k-20k Hz (=> usable from ~2.5 kHz).
Recommended partners
modeled estimateThe woofers and midranges below pair well with the Peerless by Tymphany D27TG35-06 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Peerless by Tymphany TC9FD18-08Good match· 96/100
Suggested crossover 2.42 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS125-4Good match· 91/100
Suggested crossover 2.01 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Tang Band W5-1611SAFGood match· 91/100
Suggested crossover 1.51 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS150T-8Good match· 89/100
Suggested crossover 1.58 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS150-4Good match· 88/100
Suggested crossover 1.58 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS52AN-8Good match· 84/100
Suggested crossover 4.05 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.