Peerless by Tymphany OC16SC04-04
tweeter · EBP 494 → suits a ported box · nominal (full) — Peerless by Tymphany datasheet (https://products.peerless-audio.com/pdf/264)
Thiele/Small parameters
| Fs (resonance) | 2200 Hz |
| Qts | 1.7 |
| Qes / Qms | 4.45 / 2.71 |
| Vas | 0.0 L |
| Re / nominal Z | 4.1 Ω / — |
| Xmax | 0.7 mm |
| Sensitivity | — |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
This is a tweeter; Thiele/Small box parameters are not used for enclosure design.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Peerless by Tymphany OC16SC04-04 is a 1″ tweeter with a free-air resonance of 2200 Hz and a total Q (Qts) of 1.7. Its efficiency-bandwidth product (EBP) of 494 points toward a ported alignment. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe woofers and midranges below pair well with the Peerless by Tymphany OC16SC04-04 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Peerless by Tymphany PMT-30N18AL04-04Good match· 84/100
Suggested crossover 6.62 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Tang Band W0-2008SGood match· 84/100
Suggested crossover 12.34 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Tang Band W1-1815SAGood match· 84/100
Suggested crossover 6.88 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Tang Band W1-1925SBGood match· 84/100
Suggested crossover 9.63 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Tang Band W1-1931SGood match· 84/100
Suggested crossover 6.88 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Tang Band W1-2025SAGood match· 84/100
Suggested crossover 5.96 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.