Peerless by Tymphany XT19TD00-04
tweeter · EBP 822 → suits a ported box · nominal (full) — Peerless by Tymphany datasheet (https://products.peerless-audio.com/pdf/202)
Thiele/Small parameters
| Fs (resonance) | 730 Hz |
| Qts | 0.69 |
| Qes / Qms | 0.888 / 3.1 |
| Vas | 0.0 L |
| Re / nominal Z | 2.9 Ω / — |
| Xmax | 0.9 mm |
| Sensitivity | — |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
This is a tweeter; Thiele/Small box parameters are not used for enclosure design.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Peerless by Tymphany XT19TD00-04 is a 1″ tweeter with a free-air resonance of 730 Hz and a total Q (Qts) of 0.69. Its efficiency-bandwidth product (EBP) of 822 points toward a ported alignment. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe woofers and midranges below pair well with the Peerless by Tymphany XT19TD00-04 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Peerless by Tymphany TC9FD18-08Good match· 88/100
Suggested crossover 2.42 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS125-4Good match· 85/100
Suggested crossover 2.01 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS52AN-8Good match· 84/100
Suggested crossover 4.05 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio CE65W-8Good match· 84/100
Suggested crossover 3.26 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio DA115-8Good match· 84/100
Suggested crossover 2.00 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio DS115-8Good match· 84/100
Suggested crossover 1.98 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.