SB Acoustics SB15NRX2C30-4
midwoofer · EBP 115 → suits a ported box · nominal (full) — SB Acoustics datasheet (https://sbacoustics.com/wp-content/uploads/2020/02/5in-SB15NRX2C30-4.pdf)
Thiele/Small parameters
| Fs (resonance) | 34.5 Hz |
| Qts | 0.28 |
| Qes / Qms | 0.3 / 3.58 |
| Vas | 20.5 L |
| Re / nominal Z | — / — |
| Xmax | — |
| Sensitivity | 89.5 dB (2.83 V/1 m, mfr) |
| Power handling | 50 W |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
T/S are full — fetch the datasheet for the full parameters to model a box.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The SB Acoustics SB15NRX2C30-4 is a 5″ midwoofer with a free-air resonance of 34.5 Hz and a total Q (Qts) of 0.28. Its efficiency-bandwidth product (EBP) of 115 points toward a ported alignment. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe tweeters below pair well with the SB Acoustics SB15NRX2C30-4 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Seas 27TBFC/G H1212-06Good match· 92/100
Suggested crossover 1.61 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SB29RDC-C000-4Good match· 92/100
Suggested crossover 1.61 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SATORI TW29BGood match· 92/100
Suggested crossover 1.61 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SATORI TW29B-BGood match· 92/100
Suggested crossover 1.61 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SATORI TW29D-BGood match· 92/100
Suggested crossover 1.61 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SATORI TW29TXNWG-4Good match· 92/100
Suggested crossover 1.61 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.