Tang Band W2-2355S
subwoofer · EBP 118 → suits a ported box · nominal (full) — Tang Band datasheet (https://www.tb-speaker.com/uploads/files/40c1b5de90f2f341e43dc5b1d74d0c69.pdf)
Thiele/Small parameters
| Fs (resonance) | 80 Hz |
| Qts | 0.56 |
| Qes / Qms | 0.68 / 3.3 |
| Vas | 0.1 L |
| Re / nominal Z | 3.6 Ω / 4 Ω |
| Xmax | 5.0 mm |
| Sensitivity | 72.1 dB (1 W/1 m, calc); 72 dB (2.83 V/1 m, mfr) |
| Power handling | 10 W |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
| Sealed (Qtc 0.707) — Vb | 0.2 L |
| Sealed — Fc / F3 | 101.0 / 101.0 Hz |
| Ported (suggested) — Vb | 0.4 L |
| Ported — Fb / F3 | 57.2 / 49.9 Hz |
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Tang Band W2-2355S is a 2″ subwoofer with a free-air resonance of 80 Hz and a total Q (Qts) of 0.56. Its efficiency-bandwidth product (EBP) of 118 points toward a ported alignment. In a 0.2 L sealed box it reaches an F3 of 101.0 Hz (Qtc 0.707); a suggested 0.4 L box tuned to 57.2 Hz extends to about 49.9 Hz. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe tweeters below pair well with the Tang Band W2-2355S in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Seas 27TBFC/G H1212-06Good match· 92/100
Suggested crossover 4.05 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SB29RDC-C000-4Good match· 92/100
Suggested crossover 4.05 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio ND25FA-4Good match· 92/100
Suggested crossover 4.05 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Peerless by Tymphany D27TG35-06Good match· 92/100
Suggested crossover 4.05 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS28F-4Good match· 92/100
Suggested crossover 4.05 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio AMT3-4Good match· 92/100
Suggested crossover 4.05 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.