Tang Band W57-1781
subwoofer · EBP 133 → suits a ported box · nominal (full) — Tang Band datasheet (https://www.tb-speaker.com/uploads/files/267e70e89adbc46e2286af388400b600.pdf)
Thiele/Small parameters
| Fs (resonance) | 40 Hz |
| Qts | 0.27 |
| Qes / Qms | 0.3 / 2.12 |
| Vas | 26.0 L |
| Re / nominal Z | — / — |
| Xmax | 3.0 mm |
| Sensitivity | — |
| Power handling | 50 W |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
T/S are full — fetch the datasheet for the full parameters to model a box.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Tang Band W57-1781 is a 6.5″ subwoofer with a free-air resonance of 40 Hz and a total Q (Qts) of 0.27. Its efficiency-bandwidth product (EBP) of 133 points toward a ported alignment. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe tweeters below pair well with the Tang Band W57-1781 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Eminence ALPHA-4-4Good match· 84/100
Suggested crossover 1.23 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Eminence ALPHA-4-8Good match· 84/100
Suggested crossover 1.23 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Peerless by Tymphany XT25TG30-04Good match· 84/100
Suggested crossover 1.23 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Seas C18EN002-AGood match· 84/100
Suggested crossover 1.23 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Seas L12RE-XFCGood match· 84/100
Suggested crossover 1.23 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Seas M64F001Good match· 84/100
Suggested crossover 1.23 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.