Sine Design
Bookshelf✓ Validated — no compatibility errorsEst. parts ≈ $230 USD

Sealed 2-way bookshelf — SB Acoustics SB17 + Dayton ND25FA

SB Acoustics SB17NRX2C35-4 + Dayton Audio ND25FA-4 · 14 L sealed box · 2-way Linkwitz-Riley 4th-order at 2.5 kHz

Drivers

Enclosure

TopologySealed
Net volume14 L

Model the exact box in the enclosure designer.

Crossover

TypeLinkwitz-Riley
Slope24 dB/oct (4th order)
Crossover point2.5 kHz

Tune component values in the crossover designer.

Compatibility check

Validated

This recipe passes the Sine Design compatibility engine with no errors — the enclosure alignment and crossover are sensible for these drivers. Notes below are informational.

NoteDirectivity match (modeled): crossing SB Acoustics SB17NRX2C35-4 and Dayton Audio ND25FA-4 near 2.02 kHz gives the woofer ka ≈ 2.26 (moderate match — the woofer is starting to beam). This is a modeled estimate from T/S; it improves with measured off-axis data.
Crossover designer — directivity-matched crossover point. Open the crossover designer
NoteRemember baffle-step: a real cabinet loses ~3–6 dB of bass/midbass as output transitions from half-space to full-space. Budget baffle-step compensation (BSC) in the crossover, or expect a thinner-than-flat balance.
Baffle-step compensation calculator. Open the crossover designer

About this design

A compact, accurate sealed monitor. 14 L gives the SB17 a Qtc of ~0.64 (Fc ~62 Hz) for tight, well-damped bass that's forgiving of room placement. The Dayton ND25FA neodymium dome crosses in at 2.5 kHz on an LR4 slope. Add baffle-step compensation (~3-6 dB) in the crossover for a flat in-room balance. Both drivers are 4 Ω, so the system is a nominal 4 Ω load.

Want to change a driver, the box size or the crossover point? Open this recipe in the builder — every slot is pre-filled, and the live compatibility check follows your edits. Published Thiele/Small parameters are nominal; measure your drivers (DATS/REW) and model the final cabinet before building.

Estimated parts list

PartQtyEst.Buy
SB Acoustics SB17NRX2C35-41Parts Express
Dayton Audio ND25FA-41Parts Express
0.47 mH air-core inductor (L3 series)1$6Parts Express
27 µF film capacitor (C3 shunt)1$3Parts Express
0.22 mH air-core inductor (L4 series)1$6Parts Express
5.6 µF film capacitor (C4 shunt)1$3Parts Express
8.2 µF film capacitor (C1 series)1$3Parts Express
0.15 mH air-core inductor (L1 shunt)1$6Parts Express
18 µF film capacitor (C2 series)1$3Parts Express
0.68 mH air-core inductor (L2 shunt)1$6Parts Express
Binding-post terminal cup1$6Parts Express
Acoustic damping / polyfill (~140 g)1$9Parts Express
Cabinet panel stock (MDF/ply) for ~14 L net1$45local
Fasteners, gasket & sealant1$6local
Estimated total $102excl. driver
Parts Express $51Local $51

Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.

Demo links — affiliate tracking IDs are placeholders until the program is enrolled (human-approved).

Adopt & tweak in builder →