Sine Design
Bookshelf✓ Validated — no compatibility errorsEst. parts ≈ $320 USD

Sealed 2-way monitor — Dayton RS225 + Seas 27TBFC

Dayton Audio RS225-4 + Seas 27TBFC/G H1212-06 · 22 L sealed box · 2-way Linkwitz-Riley 4th-order at 2.2 kHz

Drivers

Enclosure

TopologySealed
Net volume22 L

Model the exact box in the enclosure designer.

Crossover

TypeLinkwitz-Riley
Slope24 dB/oct (4th order)
Crossover point2.2 kHz

Tune component values in the crossover designer.

Compatibility check

Validated

This recipe passes the Sine Design compatibility engine with no errors — the enclosure alignment and crossover are sensible for these drivers. Notes below are informational.

NoteDirectivity match (modeled): crossing Dayton Audio RS225-4 and Seas 27TBFC/G H1212-06 near 998.4 Hz gives the woofer ka ≈ 1.50 (good match — the woofer is not yet beaming). This is a modeled estimate from T/S; it improves with measured off-axis data.
Crossover designer — directivity-matched crossover point. Open the crossover designer
NoteRemember baffle-step: a real cabinet loses ~3–6 dB of bass/midbass as output transitions from half-space to full-space. Budget baffle-step compensation (BSC) in the crossover, or expect a thinner-than-flat balance.
Baffle-step compensation calculator. Open the crossover designer

About this design

A larger sealed two-way built around the 8" Dayton RS225-4 aluminium-cone woofer. 22 L lands a Qtc of ~0.72 (Fc ~58 Hz, F3 ~57 Hz) — near-textbook 0.707 for clean transient response. The Seas 27TBFC metal-dome tweeter takes over at 2.2 kHz on LR4. The RS225 is a low-distortion reference woofer; budget baffle-step in the crossover.

Want to change a driver, the box size or the crossover point? Open this recipe in the builder — every slot is pre-filled, and the live compatibility check follows your edits. Published Thiele/Small parameters are nominal; measure your drivers (DATS/REW) and model the final cabinet before building.

Estimated parts list

PartQtyEst.Buy
Dayton Audio RS225-41Parts Express
Seas 27TBFC/G H1212-061Parts Express
0.47 mH air-core inductor (L3 series)1$6Parts Express
27 µF film capacitor (C3 shunt)1$3Parts Express
0.22 mH air-core inductor (L4 series)1$6Parts Express
6.8 µF film capacitor (C4 shunt)1$3Parts Express
6.8 µF film capacitor (C1 series)1$3Parts Express
0.22 mH air-core inductor (L1 shunt)1$6Parts Express
12 µF film capacitor (C2 series)1$3Parts Express
1 mH air-core inductor (L2 shunt)1$6Parts Express
Binding-post terminal cup1$6Parts Express
Acoustic damping / polyfill (~220 g)1$9Parts Express
Cabinet panel stock (MDF/ply) for ~22 L net1$45local
Fasteners, gasket & sealant1$6local
Estimated total $102excl. driver
Parts Express $51Local $51

Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.

Demo links — affiliate tracking IDs are placeholders until the program is enrolled (human-approved).

Adopt & tweak in builder →