Sine Design

Faital Pro 10PR330

woofer · EBP 167 → suits a ported box · nominal (full) — Faital Pro datasheet (https://faitalpro.com/products/files/10PR330/8/10PR330_datasheet_8.pdf)

Thiele/Small parameters

Fs (resonance)60 Hz
Qts0.33
Qes / Qms0.36 / 4.6
Vas32.5 L
Re / nominal Z5.3 Ω / 8 Ω
Xmax7.4 mm
Sensitivity94.7 dB (1 W/1 m, calc); 96 dB (2.83 V/1 m, mfr)
Power handling300 W

Published (nominal) values, params full — verify by measurement (DATS/REW) before building.

Datasheet (PDF) ↗ — manufacturer-hosted

Recommended enclosures

Sealed (Qtc 0.707) — Vb9.1 L
Sealed — Fc / F3128.5 / 128.6 Hz
Ported (suggested) — Vb16.7 L
Ported — Fb / F373.7 / 78.7 Hz
Open in designer →Use my measured parameters →Buy at Parts Express →

Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.

About this driver

The Faital Pro 10PR330 is a 10.5″ woofer with a free-air resonance of 60 Hz and a total Q (Qts) of 0.33. Its efficiency-bandwidth product (EBP) of 167 points toward a ported alignment. In a 9.1 L sealed box it reaches an F3 of 128.6 Hz (Qtc 0.707); a suggested 16.7 L box tuned to 73.7 Hz extends to about 78.7 Hz. See the sealed vs ported guide for how to choose.

Recommended partners

modeled estimate

The tweeters below pair well with the Faital Pro 10PR330 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.

Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.

Related woofers