Tang Band 75-1558SH
tweeter · nominal (partial) — Tang Band datasheet (https://www.tb-speaker.com/uploads/files/4cf275f2a256d73c100ca05871fcaf23.pdf)
Thiele/Small parameters
| Fs (resonance) | 260 Hz |
| Qts | 0.45 |
| Qes / Qms | — / 1.14 |
| Vas | — |
| Re / nominal Z | — / 8 Ω |
| Xmax | 1.5 mm |
| Sensitivity | 90 dB (2.83 V/1 m, mfr) |
| Power handling | 25 W |
Published (nominal) values, params partial — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
This is a tweeter; Thiele/Small box parameters are not used for enclosure design.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Tang Band 75-1558SH is a tweeter with a free-air resonance of 260 Hz and a total Q (Qts) of 0.45. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe woofers and midranges below pair well with the Tang Band 75-1558SH in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Tang Band W5-1611SAFGood match· 96/100
Suggested crossover 1.51 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Seas CA18RNX H1215-08Good match· 96/100
Suggested crossover 1.25 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Peerless by Tymphany SLS-P830668Good match· 96/100
Suggested crossover 784 Hz (4th-order, Linkwitz-Riley)
Build this pair → - Peerless by Tymphany TC9FD18-08Good match· 96/100
Suggested crossover 2.42 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS180-4Good match· 93/100
Suggested crossover 1.31 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS125-4Good match· 93/100
Suggested crossover 2.01 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.