Wavecor TW030WA06
tweeter · EBP 446 → suits a ported box · nominal (full) — Wavecor datasheet (https://www.wavecor.com/Driver%20specifications%20PDF/TW030WA05_06_07_08_specifications.pdf)
Thiele/Small parameters
| Fs (resonance) | 450 Hz |
| Qts | 0.55 |
| Qes / Qms | 1.01 / 1.2 |
| Vas | 0.1 L |
| Re / nominal Z | 3.4 Ω / 4 Ω |
| Xmax | — |
| Sensitivity | 88.9 dB (1 W/1 m, calc) |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
This is a tweeter; Thiele/Small box parameters are not used for enclosure design.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Wavecor TW030WA06 is a 2″ tweeter with a free-air resonance of 450 Hz and a total Q (Qts) of 0.55. Its efficiency-bandwidth product (EBP) of 446 points toward a ported alignment. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe woofers and midranges below pair well with the Wavecor TW030WA06 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Tang Band W5-1611SAFGood match· 96/100
Suggested crossover 1.51 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Seas CA18RNX H1215-08Good match· 96/100
Suggested crossover 1.25 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Peerless by Tymphany TC9FD18-08Good match· 96/100
Suggested crossover 2.42 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Scan-Speak 18M/4631T00Good match· 95/100
Suggested crossover 1.18 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS180-4Good match· 93/100
Suggested crossover 1.31 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS125-4Good match· 93/100
Suggested crossover 2.01 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.