Peerless by Tymphany HDS-P830883
woofer · EBP 70 → suits either box · nominal (full) — Peerless by Tymphany datasheet (https://products.peerless-audio.com/pdf/82)
Thiele/Small parameters
| Fs (resonance) | 68 Hz |
| Qts | 0.67 |
| Qes / Qms | 0.971 / 2.18 |
| Vas | 6.8 L |
| Re / nominal Z | 5.9 Ω / — |
| Xmax | 7.6 mm |
| Sensitivity | — |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
T/S are full — fetch the datasheet for the full parameters to model a box.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Peerless by Tymphany HDS-P830883 is a 6.5″ woofer with a free-air resonance of 68 Hz and a total Q (Qts) of 0.67. Its efficiency-bandwidth product (EBP) of 70 points toward either alignment. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe tweeters below pair well with the Peerless by Tymphany HDS-P830883 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Eminence ALPHA-4-4Good match· 84/100
Suggested crossover 1.22 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Eminence ALPHA-4-8Good match· 84/100
Suggested crossover 1.22 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Peerless by Tymphany XT25TG30-04Good match· 84/100
Suggested crossover 1.22 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Seas C18EN002-AGood match· 84/100
Suggested crossover 1.22 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Seas L12RE-XFCGood match· 84/100
Suggested crossover 1.22 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Seas M64F001Good match· 84/100
Suggested crossover 1.22 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.