Faital Pro 6PR110
midwoofer · EBP 167 → suits a ported box · nominal (full) — Faital Pro datasheet (https://faitalpro.com/products/files/6PR110/8/6PR110_datasheet_8.pdf)
Thiele/Small parameters
| Fs (resonance) | 100 Hz |
| Qts | 0.53 |
| Qes / Qms | 0.6 / 4.2 |
| Vas | 5.6 L |
| Re / nominal Z | 6 Ω / 8 Ω |
| Xmax | 2.8 mm |
| Sensitivity | 91.5 dB (1 W/1 m, calc); 96 dB (2.83 V/1 m, mfr) |
| Power handling | 150 W |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
| Sealed (Qtc 0.707) — Vb | 7.2 L |
| Sealed — Fc / F3 | 133.4 / 133.4 Hz |
| Ported (suggested) — Vb | 13.8 L |
| Ported — Fb / F3 | 75.6 / 66.7 Hz |
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Faital Pro 6PR110 is a 6.5″ midwoofer with a free-air resonance of 100 Hz and a total Q (Qts) of 0.53. Its efficiency-bandwidth product (EBP) of 167 points toward a ported alignment. In a 7.2 L sealed box it reaches an F3 of 133.4 Hz (Qtc 0.707); a suggested 13.8 L box tuned to 75.6 Hz extends to about 66.7 Hz. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe tweeters below pair well with the Faital Pro 6PR110 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- SB Acoustics SATORI TW29TXNWG-4Good match· 86/100
Suggested crossover 1.25 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SATORI TW29DNGood match· 86/100
Suggested crossover 1.25 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SATORI TW29DN-BGood match· 86/100
Suggested crossover 1.25 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SATORI TW29TXN-BGood match· 86/100
Suggested crossover 1.25 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SB29SDNC-C000-4Good match· 85/100
Suggested crossover 1.25 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SATORI TW29BNWG-4Good match· 84/100
Suggested crossover 1.25 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.