Peerless by Tymphany SLS-P830946
woofer · EBP 104 → suits a ported box · nominal (full) — Peerless by Tymphany datasheet (https://products.peerless-audio.com/pdf/168)
Thiele/Small parameters
| Fs (resonance) | 47 Hz |
| Qts | 0.43 |
| Qes / Qms | 0.454 / 7.42 |
| Vas | 6.0 L |
| Re / nominal Z | 2.7 Ω / — |
| Xmax | 10.9 mm |
| Sensitivity | — |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
T/S are full — fetch the datasheet for the full parameters to model a box.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Peerless by Tymphany SLS-P830946 is a 6″ woofer with a free-air resonance of 47 Hz and a total Q (Qts) of 0.43. Its efficiency-bandwidth product (EBP) of 104 points toward a ported alignment. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe tweeters below pair well with the Peerless by Tymphany SLS-P830946 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Eminence ALPHA-4-4Good match· 84/100
Suggested crossover 1.31 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Eminence ALPHA-4-8Good match· 84/100
Suggested crossover 1.31 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Peerless by Tymphany XT25TG30-04Good match· 84/100
Suggested crossover 1.31 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Seas C18EN002-AGood match· 84/100
Suggested crossover 1.31 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Seas L12RE-XFCGood match· 84/100
Suggested crossover 1.31 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Seas M64F001Good match· 84/100
Suggested crossover 1.31 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.