Peerless by Tymphany TC55FD00-08
fullrange · EBP 71 → suits either box · nominal (full) — Peerless by Tymphany datasheet (https://products.peerless-audio.com/pdf/174)
Thiele/Small parameters
| Fs (resonance) | 180 Hz |
| Qts | 1.2 |
| Qes / Qms | 2.54 / 2.42 |
| Vas | 0.2 L |
| Re / nominal Z | 6.8 Ω / — |
| Xmax | 2.1 mm |
| Sensitivity | — |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
T/S are full — fetch the datasheet for the full parameters to model a box.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Peerless by Tymphany TC55FD00-08 is a 2″ fullrange with a free-air resonance of 180 Hz and a total Q (Qts) of 1.2. Its efficiency-bandwidth product (EBP) of 71 points toward either alignment. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe tweeters below pair well with the Peerless by Tymphany TC55FD00-08 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Seas 27TBFC/G H1212-06Good match· 84/100
Suggested crossover 4.40 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SB29RDC-C000-4Good match· 84/100
Suggested crossover 4.40 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio ND25FA-4Good match· 84/100
Suggested crossover 4.40 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Peerless by Tymphany D27TG35-06Good match· 84/100
Suggested crossover 4.40 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS28F-4Good match· 84/100
Suggested crossover 4.40 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio AMT3-4Good match· 84/100
Suggested crossover 4.40 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.