SB Acoustics SATORI MR13PNW-4
woofer · EBP 164 → suits a ported box · nominal (full) — SB Acoustics datasheet (https://sbacoustics.com/wp-content/uploads/2021/01/5in-SATORI-MR13PNW-4.pdf)
Thiele/Small parameters
| Fs (resonance) | 41 Hz |
| Qts | 0.23 |
| Qes / Qms | 0.25 / 2.8 |
| Vas | 19.4 L |
| Re / nominal Z | — / — |
| Xmax | — |
| Sensitivity | 91 dB (2.83 V/1 m, mfr) |
| Power handling | 30 W |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
T/S are full — fetch the datasheet for the full parameters to model a box.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The SB Acoustics SATORI MR13PNW-4 is a woofer with a free-air resonance of 41 Hz and a total Q (Qts) of 0.23. Its efficiency-bandwidth product (EBP) of 164 points toward a ported alignment. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThese tweeters could pair with the SB Acoustics SATORI MR13PNW-4 in a two-way design, but the seed Thiele/Small data is too thin to grade the match yet — add or measure T/S (Fs, Sd, Xmax) to compute a real compatibility grade. You can still open a pair in the guided builder.
- Dayton Audio AMT-Mini-8Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair → - Dayton Audio AMT2-4Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair → - Dayton Audio AMT3-4Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair → - Dayton Audio AMTPOD-4Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair → - Dayton Audio AMTPRO-4Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair → - Dayton Audio AN25F-4Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.