Sine Design

SB Acoustics SB29SWNRX-S75-6

subwoofer · EBP 65 → suits either box · nominal (full) — SB Acoustics datasheet (https://sbacoustics.com/wp-content/uploads/2020/11/10in-SB29SWNRX-S75-6.pdf)

Thiele/Small parameters

Fs (resonance)20 Hz
Qts0.29
Qes / Qms0.31 / 4.5
Vas66.0 L
Re / nominal Z4 Ω / 6 Ω
Xmax—
Sensitivity84.1 dB (1 W/1 m, calc); 86 dB (2.83 V/1 m, mfr)
Power handling200 W

Published (nominal) values, params full — verify by measurement (DATS/REW) before building.

Datasheet (PDF) ↗ — manufacturer-hosted

Recommended enclosures

Sealed (Qtc 0.707) — Vb13.4 L
Sealed — Fc / F348.8 / 48.8 Hz
Ported (suggested) — Vb22.2 L
Ported — Fb / F328.0 / 31.8 Hz
Open in designer →Use my measured parameters →Buy at Parts Express →

Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.

About this driver

The SB Acoustics SB29SWNRX-S75-6 is a 10″ subwoofer with a free-air resonance of 20 Hz and a total Q (Qts) of 0.29. Its efficiency-bandwidth product (EBP) of 65 points toward either alignment. In a 13.4 L sealed box it reaches an F3 of 48.8 Hz (Qtc 0.707); a suggested 22.2 L box tuned to 28.0 Hz extends to about 31.8 Hz. See the sealed vs ported guide for how to choose.

Recommended partners

modeled estimate

The tweeters below pair well with the SB Acoustics SB29SWNRX-S75-6 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.

Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.

Related subwoofers