Seas 27TFFC
tweeter · nominal (partial) — Seas datasheet (https://www.seas.no/images/stories/prestige/pdfdatasheet/h0881_27tffc_datasheet.pdf)
Thiele/Small parameters
| Fs (resonance) | 550 Hz |
| Qts | — |
| Qes / Qms | — / — |
| Vas | — |
| Re / nominal Z | 4.8 Ω / 6 Ω |
| Xmax | — |
| Sensitivity | 91 dB (2.83 V/1 m, mfr) |
| Power handling | 80 W |
Published (nominal) values, params partial — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
This is a tweeter; Thiele/Small box parameters are not used for enclosure design.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Seas 27TFFC is a 1.5″ tweeter with a free-air resonance of 550 Hz. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe woofers and midranges below pair well with the Seas 27TFFC in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Tang Band W5-1611SAFGood match· 96/100
Suggested crossover 1.51 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Peerless by Tymphany TC9FD18-08Good match· 96/100
Suggested crossover 2.42 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Seas CA18RNX H1215-08Good match· 93/100
Suggested crossover 1.25 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS125-4Good match· 93/100
Suggested crossover 2.01 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS150T-8Good match· 93/100
Suggested crossover 1.58 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS180-4Good match· 92/100
Suggested crossover 1.31 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.