Seas U16RCY-P
woofer · nominal (partial) — Seas datasheet (https://www.seas.no/images/stories/prestige/pdfdatasheet/h1520_u16rcy_p_datasheet.pdf)
Thiele/Small parameters
| Fs (resonance) | — |
| Qts | — |
| Qes / Qms | — / — |
| Vas | — |
| Re / nominal Z | — / 8 Ω |
| Xmax | — |
| Sensitivity | — |
Published (nominal) values, params partial — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
T/S are partial — fetch the datasheet for the full parameters to model a box.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Seas U16RCY-P is a woofer. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThese tweeters could pair with the Seas U16RCY-P in a two-way design, but the seed Thiele/Small data is too thin to grade the match yet — add or measure T/S (Fs, Sd, Xmax) to compute a real compatibility grade. You can still open a pair in the guided builder.
- Dayton Audio AMT-Mini-8Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair → - Dayton Audio AMT2-4Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair → - Dayton Audio AMT3-4Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair → - Dayton Audio AMTPOD-4Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair → - Dayton Audio AMTPRO-4Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair → - Dayton Audio AN25F-4Insufficient data to grade
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.