Tang Band W0-2008S
fullrange · EBP 326 → suits a ported box · nominal (full) — Tang Band datasheet (https://www.tb-speaker.com/uploads/files/58a4d304b6d3615fcbe70d564b40317d.pdf)
Thiele/Small parameters
| Fs (resonance) | 280 Hz |
| Qts | 0.5 |
| Qes / Qms | 0.86 / 1.17 |
| Vas | 0.0 L |
| Re / nominal Z | — / — |
| Xmax | 0.0 mm |
| Sensitivity | 73 dB (2.83 V/1 m, mfr) |
| Power handling | 1 W |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
T/S are full — fetch the datasheet for the full parameters to model a box.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Tang Band W0-2008S is a 0.5″ fullrange with a free-air resonance of 280 Hz and a total Q (Qts) of 0.5. Its efficiency-bandwidth product (EBP) of 326 points toward a ported alignment. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe tweeters below pair well with the Tang Band W0-2008S in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Seas 27TBFC/G H1212-06Good match· 92/100
Suggested crossover 12.34 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SB29RDC-C000-4Good match· 92/100
Suggested crossover 12.34 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio ND25FA-4Good match· 92/100
Suggested crossover 12.34 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Peerless by Tymphany D27TG35-06Good match· 92/100
Suggested crossover 12.34 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS28F-4Good match· 92/100
Suggested crossover 12.34 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio AMT3-4Good match· 92/100
Suggested crossover 12.34 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.