Tang Band W3-2141
fullrange · EBP 163 → suits a ported box · nominal (full) — Tang Band datasheet (https://www.tb-speaker.com/uploads/files/3f6d8454c5797c9abef00c12c6cf5a0d.pdf)
Thiele/Small parameters
| Fs (resonance) | 75 Hz |
| Qts | 0.39 |
| Qes / Qms | 0.46 / 2.51 |
| Vas | 3.3 L |
| Re / nominal Z | — / — |
| Xmax | 1.6 mm |
| Sensitivity | 87 dB (2.83 V/1 m, mfr) |
| Power handling | 12 W |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
T/S are full — fetch the datasheet for the full parameters to model a box.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Tang Band W3-2141 is a 3″ fullrange with a free-air resonance of 75 Hz and a total Q (Qts) of 0.39. Its efficiency-bandwidth product (EBP) of 163 points toward a ported alignment. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe tweeters below pair well with the Tang Band W3-2141 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Seas 27TBFC/G H1212-06Good match· 92/100
Suggested crossover 2.58 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SB29RDC-C000-4Good match· 92/100
Suggested crossover 2.58 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Peerless by Tymphany D27TG35-06Good match· 92/100
Suggested crossover 2.58 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS28F-4Good match· 92/100
Suggested crossover 2.58 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio AMT3-4Good match· 92/100
Suggested crossover 2.58 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio DC28F-8Good match· 92/100
Suggested crossover 2.58 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.