Tang Band W4-2315
tweeter · EBP 210 → suits a ported box · nominal (full) — Tang Band datasheet (https://www.tb-speaker.com/uploads/files/09a7d38537ec0a6c9f3d32e50f2ca20d.pdf)
Thiele/Small parameters
| Fs (resonance) | 65 Hz |
| Qts | 0.29 |
| Qes / Qms | 0.31 / 3.68 |
| Vas | 5.0 L |
| Re / nominal Z | 3.6 Ω / 4 Ω |
| Xmax | 2.8 mm |
| Sensitivity | 88.3 dB (1 W/1 m, calc); 88 dB (2.83 V/1 m, mfr) |
| Power handling | 30 W |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
This is a tweeter; Thiele/Small box parameters are not used for enclosure design.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Tang Band W4-2315 is a 4.5″ tweeter with a free-air resonance of 65 Hz and a total Q (Qts) of 0.29. Its efficiency-bandwidth product (EBP) of 210 points toward a ported alignment. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe woofers and midranges below pair well with the Tang Band W4-2315 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Peerless by Tymphany SLS-P830668Good match· 96/100
Suggested crossover 784 Hz (4th-order, Linkwitz-Riley)
Build this pair → - Peerless by Tymphany TC9FD18-08Good match· 96/100
Suggested crossover 2.42 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Seas CA18RNX H1215-08Good match· 94/100
Suggested crossover 1.25 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS150T-8Good match· 93/100
Suggested crossover 1.58 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Scan-Speak 18W/8531G00Good match· 92/100
Suggested crossover 1.19 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Tang Band W6-1139SIFGood match· 92/100
Suggested crossover 1.25 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.