Tang Band W4-937SF
tweeter · EBP 197 → suits a ported box · nominal (full) — Tang Band datasheet (https://www.tb-speaker.com/uploads/files/a50c9fd87efb166eb691a43b68a1f8da.pdf)
Thiele/Small parameters
| Fs (resonance) | 65 Hz |
| Qts | 0.26 |
| Qes / Qms | 0.33 / 1.22 |
| Vas | 4.9 L |
| Re / nominal Z | 6.8 Ω / 8 Ω |
| Xmax | 4.5 mm |
| Sensitivity | 87.9 dB (1 W/1 m, calc); 88 dB (2.83 V/1 m, mfr) |
| Power handling | 25 W |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
This is a tweeter; Thiele/Small box parameters are not used for enclosure design.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Tang Band W4-937SF is a 4″ tweeter with a free-air resonance of 65 Hz and a total Q (Qts) of 0.26. Its efficiency-bandwidth product (EBP) of 197 points toward a ported alignment. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe woofers and midranges below pair well with the Tang Band W4-937SF in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Peerless by Tymphany SLS-P830668Good match· 96/100
Suggested crossover 784 Hz (4th-order, Linkwitz-Riley)
Build this pair → - Peerless by Tymphany TC9FD18-08Good match· 96/100
Suggested crossover 2.42 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Seas CA18RNX H1215-08Good match· 94/100
Suggested crossover 1.25 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS150T-8Good match· 93/100
Suggested crossover 1.58 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Scan-Speak 18W/8531G00Good match· 92/100
Suggested crossover 1.19 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Tang Band W6-1139SIFGood match· 92/100
Suggested crossover 1.25 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.