Tang Band W5-1611SDF
fullrange · nominal (partial) — Tang Band datasheet (https://www.tb-speaker.com/uploads/files/bd70b8d559b8df90314e13b2f789fd4a.pdf)
Thiele/Small parameters
| Fs (resonance) | 60 Hz |
| Qts | 0.41 |
| Qes / Qms | — / 3.17 |
| Vas | 15.2 L |
| Re / nominal Z | 3.6 Ω / 4 Ω |
| Xmax | 3.0 mm |
| Sensitivity | 89 dB (2.83 V/1 m, mfr) |
| Power handling | 28 W |
Published (nominal) values, params partial — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
T/S are partial — fetch the datasheet for the full parameters to model a box.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Tang Band W5-1611SDF is a 5.5″ fullrange with a free-air resonance of 60 Hz and a total Q (Qts) of 0.41. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe tweeters below pair well with the Tang Band W5-1611SDF in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Seas 27TBFC/G H1212-06Good match· 92/100
Suggested crossover 1.51 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SB29RDC-C000-4Good match· 92/100
Suggested crossover 1.51 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SATORI TW29BGood match· 92/100
Suggested crossover 1.51 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SATORI TW29B-BGood match· 92/100
Suggested crossover 1.51 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SATORI TW29D-BGood match· 92/100
Suggested crossover 1.51 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SB29RDAC-C000-4Good match· 92/100
Suggested crossover 1.51 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.