Wavecor WF132TU01
midwoofer · nominal (partial) — Wavecor datasheet (https://www.wavecor.com/Driver%20specifications%20PDF/WF132TU01.pdf)
Thiele/Small parameters
| Fs (resonance) | 60 Hz |
| Qts | — |
| Qes / Qms | — / — |
| Vas | 8.5 L |
| Re / nominal Z | 3.2 Ω / 4 Ω |
| Xmax | — |
| Sensitivity | 89.5 dB (2.83 V/1 m, mfr) |
| Power handling | 55 W |
Published (nominal) values, params partial — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
T/S are partial — fetch the datasheet for the full parameters to model a box.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Wavecor WF132TU01 is a 5.5″ midwoofer with a free-air resonance of 60 Hz. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe tweeters below pair well with the Wavecor WF132TU01 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Seas 27TBFC/G H1212-06Good match· 92/100
Suggested crossover 1.50 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Seas 27TBFC-GGood match· 92/100
Suggested crossover 1.50 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Seas 27TDCGood match· 92/100
Suggested crossover 1.50 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Seas 27TDFCGood match· 92/100
Suggested crossover 1.50 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Seas 27TFFCGood match· 92/100
Suggested crossover 1.50 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Seas M64F001Good match· 92/100
Suggested crossover 1.50 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.