Faital Pro 3FE22
fullrange · EBP 212 → suits a ported box · nominal (full) — Faital Pro datasheet (https://faitalpro.com/products/files/3FE22/8/3FE22_datasheet_8.pdf)
Thiele/Small parameters
| Fs (resonance) | 110 Hz |
| Qts | 0.47 |
| Qes / Qms | 0.52 / 5 |
| Vas | 1.3 L |
| Re / nominal Z | 6.2 Ω / 8 Ω |
| Xmax | 1.8 mm |
| Sensitivity | 87.1 dB (1 W/1 m, calc); 91 dB (2.83 V/1 m, mfr) |
| Power handling | 20 W |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
| Sealed (Qtc 0.707) — Vb | 1.0 L |
| Sealed — Fc / F3 | 165.5 / 165.5 Hz |
| Ported (suggested) — Vb | 2.2 L |
| Ported — Fb / F3 | 94.1 / 86.1 Hz |
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Faital Pro 3FE22 is a 3″ fullrange with a free-air resonance of 110 Hz and a total Q (Qts) of 0.47. Its efficiency-bandwidth product (EBP) of 212 points toward a ported alignment. In a 1.0 L sealed box it reaches an F3 of 165.5 Hz (Qtc 0.707); a suggested 2.2 L box tuned to 94.1 Hz extends to about 86.1 Hz. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe tweeters below pair well with the Faital Pro 3FE22 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Seas 27TBFC/G H1212-06Good match· 92/100
Suggested crossover 2.54 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SB29RDC-C000-4Good match· 92/100
Suggested crossover 2.54 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Peerless by Tymphany D27TG35-06Good match· 92/100
Suggested crossover 2.54 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio AMT3-4Good match· 92/100
Suggested crossover 2.54 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio EC30-4Good match· 92/100
Suggested crossover 2.54 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SATORI TW29BGood match· 92/100
Suggested crossover 2.54 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.