Faital Pro 6PR130
woofer · EBP 307 → suits a ported box · nominal (full) — Faital Pro datasheet (https://faitalpro.com/products/files/6PR130/8/6PR130_datasheet_8.pdf)
Thiele/Small parameters
| Fs (resonance) | 175 Hz |
| Qts | 0.48 |
| Qes / Qms | 0.57 / 3.1 |
| Vas | 4.2 L |
| Re / nominal Z | 5.2 Ω / 8 Ω |
| Xmax | 4.6 mm |
| Sensitivity | 97.8 dB (1 W/1 m, calc); 101 dB (2.83 V/1 m, mfr) |
| Power handling | 200 W |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
| Sealed (Qtc 0.707) — Vb | 3.6 L |
| Sealed — Fc / F3 | 257.8 / 257.8 Hz |
| Ported (suggested) — Vb | 7.5 L |
| Ported — Fb / F3 | 146.5 / 133.1 Hz |
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Faital Pro 6PR130 is a 7″ woofer with a free-air resonance of 175 Hz and a total Q (Qts) of 0.48. Its efficiency-bandwidth product (EBP) of 307 points toward a ported alignment. In a 3.6 L sealed box it reaches an F3 of 257.8 Hz (Qtc 0.707); a suggested 7.5 L box tuned to 146.5 Hz extends to about 133.1 Hz. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe tweeters below pair well with the Faital Pro 6PR130 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Eminence ALPHA-4-4Good match· 84/100
Suggested crossover 1.20 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Eminence ALPHA-4-8Good match· 84/100
Suggested crossover 1.20 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Peerless by Tymphany XT25TG30-04Good match· 84/100
Suggested crossover 1.20 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Visaton BG13P-8Good match· 84/100
Suggested crossover 1.20 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Visaton DSM50FFL-8Good match· 84/100
Suggested crossover 1.20 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Visaton FR10HM-8Good match· 84/100
Suggested crossover 1.20 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.