Peerless by Tymphany FSL-1530R01-08
woofer · EBP 163 → suits a ported box · nominal (full) — Peerless by Tymphany datasheet (https://products.peerless-audio.com/pdf/70)
Thiele/Small parameters
| Fs (resonance) | 41 Hz |
| Qts | 0.24 |
| Qes / Qms | 0.252 / 4.98 |
| Vas | 180.0 L |
| Re / nominal Z | 5.3 Ω / — |
| Xmax | 4.7 mm |
| Sensitivity | — |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
T/S are full — fetch the datasheet for the full parameters to model a box.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Peerless by Tymphany FSL-1530R01-08 is a 16.5″ woofer with a free-air resonance of 41 Hz and a total Q (Qts) of 0.24. Its efficiency-bandwidth product (EBP) of 163 points toward a ported alignment. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe tweeters below pair well with the Peerless by Tymphany FSL-1530R01-08 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Eminence ALPHA-4-4Good match· 84/100
Suggested crossover 496 Hz (4th-order, Linkwitz-Riley)
Build this pair → - Eminence ALPHA-4-8Good match· 84/100
Suggested crossover 496 Hz (4th-order, Linkwitz-Riley)
Build this pair → - Seas C18EN002-AGood match· 84/100
Suggested crossover 496 Hz (4th-order, Linkwitz-Riley)
Build this pair → - Seas L12RE-XFCGood match· 84/100
Suggested crossover 496 Hz (4th-order, Linkwitz-Riley)
Build this pair → - Seas MR18REX-XFGood match· 84/100
Suggested crossover 496 Hz (4th-order, Linkwitz-Riley)
Build this pair → - Seas T18REX-XFCGood match· 84/100
Suggested crossover 496 Hz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.