SB Acoustics SATORI MW19P-8
woofer · EBP 92 → suits either box · nominal (full) — SB Acoustics datasheet (https://sbacoustics.com/wp-content/uploads/2021/02/7.5in-SATORI-MW19P-8-1.pdf)
Thiele/Small parameters
| Fs (resonance) | 29.5 Hz |
| Qts | 0.29 |
| Qes / Qms | 0.32 / 4.18 |
| Vas | 61.0 L |
| Re / nominal Z | 6 Ω / 8 Ω |
| Xmax | — |
| Sensitivity | 88.7 dB (1 W/1 m, calc); 89 dB (2.83 V/1 m, mfr) |
| Power handling | 70 W |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building.
Datasheet (PDF) ↗ — manufacturer-hosted
Recommended enclosures
| Sealed (Qtc 0.707) — Vb | 12.3 L |
| Sealed — Fc / F3 | 71.9 / 71.9 Hz |
| Ported (suggested) — Vb | 20.5 L |
| Ported — Fb / F3 | 41.3 / 47.0 Hz |
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The SB Acoustics SATORI MW19P-8 is a 7″ woofer with a free-air resonance of 29.5 Hz and a total Q (Qts) of 0.29. Its efficiency-bandwidth product (EBP) of 92 points toward either alignment. In a 12.3 L sealed box it reaches an F3 of 71.9 Hz (Qtc 0.707); a suggested 20.5 L box tuned to 41.3 Hz extends to about 47.0 Hz. See the sealed vs ported guide for how to choose.
Recommended partners
modeled estimateThe tweeters below pair well with the SB Acoustics SATORI MW19P-8 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Seas M64F001Good match· 92/100
Suggested crossover 1.16 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Seas MR18REX-XFGood match· 92/100
Suggested crossover 1.16 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Tang Band 75-1558SHGood match· 92/100
Suggested crossover 1.16 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Tang Band W8-2314Good match· 92/100
Suggested crossover 1.16 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Wavecor TW030WA05Good match· 92/100
Suggested crossover 1.16 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Wavecor TW030WA06Good match· 92/100
Suggested crossover 1.16 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.