Sine Design

SB Acoustics SATORI WO24P-4

subwoofer · EBP 67 → suits either box · nominal (full) — SB Acoustics datasheet (https://sbacoustics.com/wp-content/uploads/2024/04/9.5in-SATORI-WO24P-4.pdf)

Thiele/Small parameters

Fs (resonance)28 Hz
Qts0.4
Qes / Qms0.42 / 6.7
Vas71.0 L
Re / nominal Z3.3 Ω / 4 Ω
Xmax
Sensitivity87.5 dB (1 W/1 m, calc); 91 dB (2.83 V/1 m, mfr)
Power handling90 W

Published (nominal) values, params full — verify by measurement (DATS/REW) before building.

Datasheet (PDF) ↗ — manufacturer-hosted

Recommended enclosures

Sealed (Qtc 0.707) — Vb33.4 L
Sealed — Fc / F349.5 / 49.5 Hz
Ported (suggested) — Vb69.0 L
Ported — Fb / F328.2 / 27.6 Hz

Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.

About this driver

The SB Acoustics SATORI WO24P-4 is a 9″ subwoofer with a free-air resonance of 28 Hz and a total Q (Qts) of 0.4. Its efficiency-bandwidth product (EBP) of 67 points toward either alignment. In a 33.4 L sealed box it reaches an F3 of 49.5 Hz (Qtc 0.707); a suggested 69.0 L box tuned to 28.2 Hz extends to about 27.6 Hz. See the sealed vs ported guide for how to choose.

Recommended partners

modeled estimate

The tweeters below pair well with the SB Acoustics SATORI WO24P-4 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.

Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.

Related subwoofers